Manoplas de extracción RagTop
| ⓘ LOS GUANTES GRANDES Y PEQUEÑOS ESTÁN EN PEDIDO RETRASO A PARTIR DEL 3/6/24. DEBIDO LLEGAR A FINALES DE AGOSTO. |
Los guantes de extracción RagTop son sus guantes de rescate técnico y de extracción automática para bomberos, livianos, transpirables, resistentes a cortes y de bajo perfil.
Con una clasificación de corte A5, estos guantes cuentan con un diseño simple y un nivel práctico de protección para sus manos, al mismo tiempo que mantienen un ajuste flexible y cómodo. Máxima destreza y durabilidad superior sin concesiones.
DETALLES
- Materiales de primera calidad
- Calificación de corte ANSI nivel 5
- Capa exterior 100% Kevlar
- Capa interior completa de Kevlar negro.
- Palma de cuero sintético con paneles de cuero de canguro.
- Laminado de Kevlar en el dorso de los dedos.
- Nudillos acolchados acanalados.
- Ligero y transpirable
- Construcción ergonómica
INFORMACIÓN
- La clasificación de corte del guante requiere de 2200 a 2999 gramos de fuerza para cortar el material.
- La capa exterior y la capa interior de la estructura del guante equivalen a 2 capas totales de protección de Kevlar.
- Los nudillos acolchados acanalados crean protección adicional contra peligros.
Hand wash with mild detergent and warm water only. DO NOT clean your gloves using a gear extractor, nor use chlorine bleach or other solvents.
Shape gloves to your hand and air dry. Excess water should be squeezed (not wrung). Allow gloves to fully dry after cleaning, then stow them in a cool and dry environment.
Occasionally condition gloves with balm / oil based leather care products.
Yellow leather dye may transfer onto your hands when fully soaked during the first few cleanings – this will come off after washing throughly with soap and water.
- Gloves typically fit true to size for the average hand, so you can comfortably order in the size of your current work gloves or extrication gloves.
- The best fit should feel snug in the palm and your fingertips should reach the ends of the gloves comfortably.
- If viewing on a phone, turn horizontally to declutter the chart.
| NFPA Sizing | 64N | 70N | 70W | 76N | 76W | 82N | 82W | 82XW |
| RagTop Sizing | 2XS | XS | S | M | L | XL | 2XL | 3XL |
- A6 cut level protection
- Kevlar® steel knit liner
- 100% Goatskin leather shell
- 100% Goatskin leather palm section
- Reinforced palm-side wrist seam
- Lightweight and dexterous
- Ergonomic build
This glove provides heavy-duty protection, designed to withstand 3,000 to 3,999 grams of cutting load.
- Llegada Estimada - Mayo, 2024
All gloves purchased on preorder are planned to ship in August, 2026.
Delivery times are dependent on carrier / shipping method and are subject to change with or without notice. Any delays in shipping may be out of our control.
Any impacts on holiday shipping will be noted on the website.