Brim Bends

Mostly straight in the front with a slight curl along the sides and a slight tilt downwards in the rear of the brim. The timeless look of the traditional American leather fire helmet.

The usual helmet bend straight out of the factory. A significant dip downwards in the front and rear of the brim, typically accompanied with a vague or significant curl to the sides. Most vary from helmet to helmet.

Straight and flat in the front, following the same way along the sides, and flipped upwards in the rear of the brim. The scale of the flip in the rear typically varies but is usually not exaggerated.

Different from the Squad Flip, this bend is tilted upwards in the front, following flat along the sides and flipped upwards in the rear of the brim. The scale of the flip in the front and rear varies but is usually not exaggerated.

As straight as possible in the front and rear of the brim and flat all along the sides. Just a horizontal bend, that's it, though depending on the stubbornness of the leather, it's flat appearance can vary in some areas from helmet to helmet.

Typically straight in the front, flat along the sides and bent downwards significantly in the rear of the brim. The sides can be curled upwards slightly and the scale of the bend in the rear varies, but is usually not exaggerated.

Straight in the front, significantly curled along the sides and slightly tilted downwards in the back. The curl can alternate between the frontmost section or rearmost section of the helmet.

Straight in the front, significant curled on the sides toward the rear of the helmet following through with a subtle dip downwards in the back of the brim.