RagTop Fire Duty Mitts

$150.00
/

* IMPORTANT | PLEASE READ *

AS OF 1/29/25, NEW ORDERS PLACED FOR THE FOLLOWING SIZES ARE PUSHED TO OUR NEXT BACKORDER DELIVERY.

2XS | SMALL | LARGE | 2XL 

ETA: LATE APRIL

 

LARGE: ON BACKORDER AS OF 11/14/24
2XL: ON BACKORDER AS OF 12/10/24
SMALL | MEDIUM | XL: ON BACKORDER AS OF 12/12/24

ETA: FEBRUARY 2025

 

NFPA 1971-2018 EDITION COMPLIANT

Wear a dependable glove that easily dons / doffs when wet, and suits your needs where other gloves have struggled to deliver. Built for speed and comfort; The RagTop Fire Duty Mitts are your most comfortable, dexterous, and low-profile structural firefighting gloves.

Your hands are your most predominant asset on the fireground. Don't hold them back, and equip yourself with your new favorite structural glove for superior dexterity + enhanced durability.

 

►  LEARN MORE  

►  VIEW POLICY

►  REQUEST RETURN / EXCHANGE

 

  • Gloves typically fit true to size for the average hand, so you can comfortably order in the size of your current structural gloves

  • The best fit should feel snug in the palm, and your fingertips should reach the ends of the gloves comfortably. Gloves will expand slightly

  • If you currently wear Vanguard structural gloves, we recommend going down a size for an optimal fit

  • Turn phone sideways if viewing on mobile looks distorted

 NFPA Sizing 64N 70N 70W 76N 76W 82N 82W 82XW
RagTop Sizing 2XS XS S M L XL 2XL 3XL

 

Hand wash with mild detergent and warm water only. DO NOT clean your gloves using a gear extractor or use chlorine bleach, or other solvents.

Shape glove and air dry. Excess water may be squeezed (not wrung). Allow gloves to fully dry after cleaning, and stow them in a cool and dry environment.

  • NFPA compliant (1971-2018 Ed.)
  • Full kangaroo leather
  • Double sewn side seams
  • Double sewn Kevlar® inner liner
  • Padded knuckles for added thermal protection
  • Sculpted finger tapering
  • Reinforced thumb crotch + palm
  • Open palm-side wristlet
  • Easy to don / doff when wet
  • Easy to break in
  • Glove loop

NFPA 1971-2018 EDITION COMPLIANT

We built our gloves with a fully ergonomic design from the ground up with a new and improved handprint compared to other gloves on the market.

The Kevlar® liner of the Fire Duty Mitts is reinforced to prevent it from pulling inside out, as well as to allow for easy donning / doffing, especially when wet.

To provide enhanced dexterity, the finger sculpt is designed to follow the natural taper of the finger from the knuckle to the tip, rather than maintaining the same width from knuckle down. This ties into our ergonomic design of the gloves and boasts a comfortable fit and enhanced range of motion right out of the box. 

Glove Size

"[...] your duty mitts are probably the best gloves I've ever worn. They go on with ease even when my hands are drenched in sweat from the North Carolina heat and humidity."

Ryker P.

"Instantly noticed they're pretty broke in [...] great in my opinion. The shaping on the fingertips is amazing, I finally don't feel like a lego figure trying to grab things."

Grayson R.

"[...] By far better dexterity than other manufacturers. Hopefully one day the sewing can be done by a union shop in the northeast. Stellar work."

Ryan H.

"Even after they were wet and I had to put them back on after changing bottles, it was just as easy as the first time I put them on!"

Brian O.

"They fit great! I put them in warm water for about 10 minutes. Had NO issues getting a wet hand in or out. Have them with me on shift today. So far so good!"

John S.

"Feel true to size, great quality and dexterity. Can’t wait to put them to use."

Alex M.

"Initial thoughts on the glove after putting them on for the first time - they’re unreal! Excellent product guys keep up the good work!"

Bryce S.

"Can confirm, best glove I've ever worn."

Matt H.